2020 Ram 1500 EcoDiesel Announced
Trucks, despite all the bells and whistles out there, ultimately need to deliver the power and torque their owners request. RAM has stepped up to the plate on that point with their 3rd-generation 3.0-liter V-6 EcoDiesel for the 1500 pickup truck! With a best-in-class torque rating under its belt already, this engine is going to mow down any doubters! The Ram 1500 delivers a world-crushing 480 lb-ft of torque and then ups the ante with a towing capacity of up to 12,560 lbs with this engine. This unimaginable engine was built in Ferrara, Italy, and can be embedded in all Ram 1500 models, including the Rebel, which, up until this year, has not been allowed to do so! Did we mention that previous generations of this engine already won "Wards 10 Best Engines" for 3 consecutive years (2014, 2015, 2016)? Need to know more? We understand-and when it comes time to keep your truck performing at its best, you can count on the expert service team right here at Charlie's CDJR.

Reid Bigland, the Head of Ram Brand, had this to say, among other good things: "The Ram 1500 EcoDiesel is America's most powerful half-ton diesel pickup, following up on Ram's Heavy Duty torque leadership and achieving what no other manufacturer has, with up to 480 lb-ft of torque in a 3.0-L engine. The EcoDiesel engine and our eTorque mild-hybrid powertrain technologies deliver the highest available fuel efficiency for our Ram 1500 customers."

2020 EcoDiesel Facts:
  • A double-vacuum pump system employs both an electric pump and a novel mechanical low-friction pump with redesigned blades to improve system performance.
  • A latest-generation, water-cooled variable-geometry turbine turbocharger affords 1500 proficiency and responsiveness in transient states.
  • Compression ratio moves from the former 16.5:1 to an exceptional 16.0:1.
  • The exhaust gas recirculation system framework now has a dual-loop (low/high-pressure) system. This pulls gases behind the diesel particulate filter via the extra low-pressure circulation system, which in turn reduces drive losses to the turbocharger, resulting in greater fuel conservation.
  • High-pressure direct-injection fuel injector nozzles were reconstructed to accommodate the bolstered combustion chamber. (29,000 psi/2,000 bar)
  • Thought-out cylinder head intake ports promote more efficient air flow, delivering both fuel savings and performance.
  • Aluminum alloy pistons were completely redesigned to incorporate thinner rings and a low-friction coating on the pin/side-skirts, resulting in reduced losses.
Let Us Go Through Some Advanced Components of the 2020 EcoDiesel!
This third generation's the charm for the turbocharged 3.0-liter EcoDiesel V-6, now with a broadened scope in both torque & horsepower, a 16.0:1 compression ratio, and a best-in-class 480 lb-ft of torque at 1,600-RPM standing. In the 2020 Ram 1500 pickup truck, the 3.0-liter EcoDiesel V-6 enlarges its lead in terms of torque by 14-percent from just 2018! The engine authorizes horsepower values of 8-percent higher, up to 260-hp at 3,600 RPM (since the second-generation engine).

The 3.0-liter EcoDiesel V-6 features a 60-degree angle between the cylinder banks and dual overhead camshafts (DOHC) with four valves per cylinder. The EcoDiesel V-6 features a forged-steel crankshaft and delivers power with bolstered connecting rods. Delving further, note the heat-treated aluminum cylinder heads that operate different bearing caps, in a successful bid to reduce friction, noise, vibration, and harshness (NVH). Inside this modern marvel, roller-finger followers serve the chain-driven overhead camshafts, and aluminum alloy pistons are cooled at the bottom by oiljet showers! The block is presently lighter (than traditional cast iron) because it is formulated with compacted graphite iron, a blend that enhances strength, buffers vibrations, and saves fuel. Furthering that goal is a compacted graphite iron bedplate on the block, contributing to rigidity.

Interested in the 2020 EcoDiesel Engine?
It's hard not to be impressed by all the amazing work that Ram put into this one, and we certainly share your enthusiasm! Why not take a gander at our full list of capable used inventory right here?

Contact

Charlie's Dodge Chrysler Jeep Ram

725 Illinois Avenue
Directions Maumee, OH 43537-1711

  • Sales: (419) 210-8091
  • Service: (419) 210-8106
  • Parts: (419) 580-1015

Make an Inquiry

* Indicates a required field

By submitting your contact information, you consent to be contacted by telephone about purchasing a vehicle or obtaining vehicle financing. Clicking on the Submit button above is your electronic signature.